Super Iron Out Rust Stain Remover - 1 Bottle (30 oz ea)
1 Bottle = 1 lb 14 oz (850 g); Rust Stain Remover - Multi-Purpose. Use on toilets, bath, white laundry, appliances, water softener cleaner, and more. Rinses rust and iron stains away without scrubbing. Cleans even the toughest rust and iron stains. Safe for use on virtually all surfaces and white laundry. Safe for septic tanks. Contains no phosphates. Made in USA.
- 1 Bottle of 1 lb 14 oz (850 g)
- Suggested use: Cleaning instructions: (For stubborn stains, increase dosage and/or contact time.) Toilet Bowl and Water Tank: Remove cleaners from bowl or tank. Flush. Bowl: 1. Add 1/2 cup to water in bowl. 2. Scrub stained area with brush. 3. Let stand until stains are gone. Flush. Tank: 1. Raise water level above stain line if possible. 2. Add 1/2 cup. 3. Let stand overnight or until stains are gone. White Laundry and Fabrics: Note: Do not use with bleach or peroxide. 1. Add 1/2 cup to warm water as washer is filling. 2. Add clothes and let soak for 5 minutes, if possible by stopping machine. 3. Add detergent and resume wash/rinse cycle. 4. Dry as usual. Laundry with Color or Embroidery: Test all colors before using. Use only on colorfast dyes. Note: Wash each item separately using the white clothes instructions. Product may irreparably damage colors and embroidered logos. Dishwasher/Washing Machines: 1. Add 1/2 cup to empty machine 2. Run machine through normal cycle using water only. Repeat as needed. Dishes, Glassware, Plastic ware: 1. Dissolve 1/3 cup in 1 gal of warm water. 2. Soak articles 5 min, or until stains are gone. 3. Rinse thoroughly. Tubs, Sinks, Tile: 1. Wet area to be cleaned. 2. Apply powder to damp sponge or cloth. 3 Rub lightly until stains are gone. Rinse. Note: Not recommended for older, worn or chipped porcelain cast iron fixtures. Water Softeners: All softeners on iron bearing water require Super Iron Out as preventative maintenance and to eliminate iron buildup. First Application: 1. Dissolve 1 cup in 1/2 gal cold water. 2. Pour directly into brine well (For softeners with no brine well, pour directly into salt tank when salt level is low). 3. Manually regenerate softener. Repeat for heavily fouled unit. Regular Use: Add 1/4 cup per 40 lbs of salt. 2. Layer for continuous treatment. Cabinet Models: Use for periodic cleaning only. Follow first application instructions above. Repeat regularly. Note: If taste or odor is detected in tap water, manually regenerate softener, then run cold water until odor is gone. Exterior Surfaces: 1. Mix 1 cup into 1 gal warm water. 2. Wet surface with clear water. 3. Apply with brush or sponge. 4. Keep saturated until stains are gone. Rinse. Note: Avoid contact with vegetation. Do not open machine mid-cycle.
- Manufacturer: Iron Out, Inc.
Warning: Eye and skin irritant. Harmful if swallowed. Vapor harmful. Contains sodium hydrosulfite and sodium bisulfite. Avoid contact with eyes and skin. Rubber gloves are recommended. Use with adequate ventilation. Avoid breathing vapors after mixing with water. Persons with respiratory problems or sulfite sensitivity should not use this product as vapors may impair ability to breathe. Do not mix with any other cleaner or chemical. Mix in adequate open container to avoid spills or bursting. Store unused product in original container and keep dry. Keep out of reach of children. First Aid: In case of eye contact, rinse thoroughly with water for at least 15 minutes. Get prompt medical attention. In case of skin contact, rinse with cool water. If swallowed, give plenty of water or milk. Call physician or local poison control center immediately.